If you ride a bike, you know that cleaning and maintenance are not optional: they are part of performance. A clean bike not only looks better, it performs better, lasts longer, and prevents mechanical problems. In this guide, we'll tell you how to care for your bike step-by-step, with the right products and zero complications.

1. Quick clean for your bike after every ride

Why do it: Dust, mud, and moisture accumulate and can damage the drivetrain, frame, and bearings. Depending on the conditions of each route, we need to do a quick clean to prevent dirt from accumulating on your bike.

If your bike has accumulated dust and debris on dry days, you can use our dry bike cleaner for a faster and more efficient superficial cleaning.

If we've been out on a muddy and rainy day, then it's advisable to use degreaser for the drivetrain, and bike cleaner with water for the rest of the bicycle.
To go an extra mile, we also recommend cleaning the brake discs with our brake cleaner to remove all residue and improve their performance and extend their useful life. The braking system is essential for our safety.

Klinpig Tip: avoid direct spray on axles, bottom bracket or headset. A little care = many more miles.

2. Clean and protect the drivetrain

Not just on rainy days, but periodically we need to degrease the drivetrain and reapply lubricant to keep the system clean, efficient, and free of mechanical failures.

The chain is the heart of performance. If it's dirty, pedaling becomes heavy and wears out the entire system.

Basic steps:

- Use Klinpig degreaser to remove accumulated dirt.

- Dry the chain thoroughly.

- Apply your Klinpig lubricant, depending on use wax or oil, find more info on our blog.

3. Check the tubeless system

As you know, we highly recommend using tubeless for road cycling, mountain biking, or gravel.
Using puncture sealant for bikes in your setup will make you forget about punctures, improve comfort, and enhance your bike's traction and braking safety.

But using puncture sealant requires periodic maintenance to ensure the tubeless system is in optimal working condition.

Quick Checklist:

- Check the level of Klinpig sealant every 2-3 months.

- Ensure the tubeless valves are clean and unobstructed.

- Replace Presta valve cores if you notice air loss or difficulty inflating.

4. Take care of your shoes and bottles

Your gear is also part of your performance. Clean shoes and odor-free water bottles make every ride more enjoyable.

Use the Klinpig blue range:

- Bottle disinfectant: eliminates bacteria and bad odors.

- Shoe cleaner: removes mud and leaves a fresh finish.

Regular cleaning of your equipment will extend its useful life and allow you to enjoy it more.

Keeping your bike like new doesn't depend on time, but on the products and habits you use. At Klinpig, we design each formula so that your bike, your routes, and you are always at the top.

Explore all Klinpig maintenance products and take your bike to the next level.

la imagen ya hay una opcion para ponerla en shopify y ya esta puesta